Plastic Acrylic Plexiglass Glue Adhesive #16 WELD-ON 5 Oz 16

• Popularity - 24455 views, 3493.6 views per day, 7 days on eBay. Super high amount of views. 1158 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

YOU ARE BUYING A<br>5 OZ TUBE #16<br>OUR'S IS  (LOW VOC) WHICH IS SAFER TO USE!<br>SUBSTRATE RECOMMENDATIONS<br>WELD-ON 16 is especially formulated to bond acrylic plastic. It can also be used for bonding styrene,<br>butyrate, PVC and polycarbonate, .<br>BONDING RECOMMENDATIONS<br>WELD-ON 16 is recommended as an excellent general purpose, high strength acrylic cement. It is especially<br>useful where fast cure and high strength are desired for applications such as large housings, signs, plastic<br>letters, industrial fabrications, display items, lenses and models.<br>GENERAL DESCRIPTION<br>WELD-ON 16 is a very high strength, clear, medium bodied, fast curing, bodied solvent-type acrylic cement.<br>Applied to cast, molded or extruded acrylics, it will effect initial bonds within minutes and form strong joints<br>within hours.This product may be thinned with WELD-ON 3 by approximately 10%. Initial bond forms very<br>quickly so some parts may be handled within a few minutes of application. Bond strength continues to<br>develop very rapidly reaching a substantial level within hours. Joints are water and weather resistant and will<br>generally have similar physical and chemical properties to acrylic plastic.<br>BOND STRENGTH DATA<br>The following strength data was obtained with compressive shear loading at 0.05”/min.The materials tested<br>were ” acrylic lap joints of 1 sq. in. bonding area.<br>SUBSTRATE MATERIAL<br>24 HOURS<br>1 WEEK<br>Acrylic                                                1700 PSI      2200 PSI<br>Polycarbonate                                     1000             1700<br>Styrene                                                900              1700<br>ADHESIVE PROPERTIES AND CHARACTERISTICS<br>COLOR: Clear<br>VISCOSITY: 800 cps<br>WORKING TIME: 2 – 3 minutes<br>FIXTURE TIME: 5 – 6 minutes<br>80% STRENGTH: 16 hours<br>SPECIFIC GRAVITY: 1.02 ± .040<br>COVERAGE: 10mil: 28sq. ft./Pint 224 sq. ft./Gallon<br>20mil: 14sq. ft./Pint 112 sq. ft./Gallon<br>DIRECTIONS FOR USE<br>• Parts to be joined should be clean and fit without forcing.<br>• Apply WELD-ON 16 to one or both surfaces with brush, polyethylene squeeze bottle or gun.<br>• If cement is applied to one surface, bring the two surfaces in gentle contact for several seconds to<br>allow the dry surfaces to be softened.<br>• Assemble with firm pressure while parts are still wet.<br>• Hold or clamp assembled parts firmly until initial set. Joint strength will increase greatly in 24 hours.<br>Thereafter, strength will continue to increase gradually for some weeks.<br>